|
Product Details:
|
| Appearance: | Clear Flakes Or Granular | Application: | Water Based Printing Ink |
|---|---|---|---|
| Similar To: | Joncryl 678 | Packing: | 25kg /bag |
| Non-Volatile (%): | 98.7 | Density (g/cm3, 25℃): | 1.16 |
| Molecular Weight: | 8500 | Softening Point, Ring & Ball (℃: | 165 |
| Tg (℃: | 85 | Acid Number: | 215 |
| Shelf Time: | 2 Years | ||
| Highlight: | Joncryl 678 Water Based Acrylic Resin,Water Based Acrylic Resin,Joncryl 678 |
||
Features & Benefits:
① General purpose mid-range molecular weight Acrylic Resin
② High Gloss and Holdout
③ Promotes Resolubility
④ Fine Clarity
Specification:
| Appearance | Clear Flakes or granular |
| Non-Volatile (%) | 98.7 |
| Density (g/cm3, 25℃) | 1.16 |
| TG(℃) | 85 |
| Acid number | 215 |
| molecular weight | 8500 |
| softening point, Ring &Ball (℃) | 165 |
| Total VOC (wt. %) | 1.3 |
Application:
Water Based Printing Ink, Water Based Varnish, pigment grinding vehicle, polymer surfactant for emulsion
Packing: 25kgs net per bag.
Store: Should be stored in dry, aeration area, avoiding the wet. The valid store period is two years.
Dissolution method
| material | BAW-563 Quantity(KG) | Remark | |
| 1 | Resin | 25-30% | adjust as you need |
| 2 | Ammonia water | 8 - 10% | |
| 3 | Alcohol solvent | defined amount | as needed |
| 4 | Purified water | 60-61% | 80 degree centigrade |
| 5 | Defoamer | 0.1-0.2% | |
| 6 | Purified water | Remain | |
| Total | 100% |
Process step in dispersion machine
1, Put the resin into water with stirring
2, Stirring the resin and ensure the resin be totally in water (10 to 20 minute)
3, then, add 80% ammonia water, half an hours later, add the remaining 20% ammonia water, this helps to reduce the volatilization of ammonia water, fully promote the soluble.
4, High speed stirring(1200-1500r/min)until the resin be dissolved fully. (about 3.5-4.5 hours)
5, PH remains in 8.5-9.5 , you can adjust the PH value by add ammonia water.
Packing image:
Contact Person: Linda Qiang
Tel: 0086-13856999452
Fax: 86-551-63517768
