|
Product Details:
|
| Material: | Virgin Pp | Product Name: | PP Fiber Monifilament Form |
|---|---|---|---|
| Crack Elongation: | 15-20% | Density: | 0.91 |
| Highlight: | 100% Virgin Polypropylene Fiber,100% Virgin PP Fiber,Monofilament Form Virgin Polypropylene Fiber |
||
100% Virgin PP Fiber Monofilament 110F For Cement Cracking Resistance
PP Fiber Monofilament Introduction:
Briture PP Fiber 110F is made of 100% virgin homopolymer polypropylene with form of monoflament type, it is mainly used for concrete and motar reinforcement-anti-cracking.
PP Fiber Monofilament Function:
| Resist to shrink | Resist to crack |
| Increase freezing | Increase thawing resistance |
| Prevent mortar split | Prevent crackle expansion |
PP Fiber Monofilament Specification:
| Raw material | 100% virgin PP |
| Crack Elongation | 15-20% |
| Diameter | 30+/-5 microns |
| Melting Point | 160-170 |
| Tensile Strength | > 500Mpa |
| Elastic Modulus | >4500Mpa |
| Length | 6mm, 12mm, 18mm... |
| Acid & Alkali Resistance | strong |
| Density | 0.91 |
| Fiber Type | Monofilament (Microfiber) |
| Melting Point(℃) |
160—170 |
PP Fiber Monofilament Usage:
1. Comound Amount. To resist the common cracks on surfaces. 0.6kg/m3 fibers to cement paint is enough, and for reinforced application 0.9-1kg/m3 is enough.
2. Stiring requirement. The proportion of cement,sand and aggregate is no need to be changed. Put cement, aggregate, additive and fiber together, then stir after adding enough water (Do not stir without water!) and time for stirring can be prolonged for 2-3 minutes in order to make the compound mix completely.
PP Fiber Monofilament Appliaction:
|
Be suitable for the water-proof layer |
floor |
| ,inner &outer wall of industrial and civil construction |
industrial workshop |
| warehouse | parking lot |
Certificate:
Contact Person: Linda Qiang
Tel: 0086-13856999452
Fax: 86-551-63517768
